GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Avalanche - 4WD 🢒 Accessories 🢒 Entertainment 🢒 Memory Seat Control Module Replacement

Removal Procedure

    Object Number: 914889 Size: SH
  1. Remove the seat cushion. Refer to Front Seat Cushion Frame Replacement .
  2. Disconnect the upper electrical harness connectors (3).
  3. Remove the module (2) retaining screws (1).
  4. Slide the module to the right to disengage the lower retainers.

    5. Object Number: 914892 Size: SH
  5. Disconnect the lower electrical harness connectors (2).
  6. Remove the module from the vehicle.

Installation Procedure

    Object Number: 914892 Size: SH
  1. Position the module into the vehicle.
  2. Connect the lower electrical harness connectors (2).

    3. Object Number: 914889 Size: SH
  3. Slide the module (2) to the left to engage the lower retainers.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the module retaining screws (3).

    5. Tighten
    Tighten the screws to 3 N·m (26 lb in).

  5. Connect the upper electrical harness connectors (3).
  6. Install the seat cushion. Refer to Front Seat Cushion Frame Replacement .
  7. If a new memory seat module was installed, calibrate the seat. Refer to Memory Seat Calibration .