Removal Procedure
- Remove the instrument panel (I/P) trim panel. Refer to
Instrument Panel Assembly Replacement
in Instrument Panel, Gages, and Console.
- Remove the screws (3) from the air distribution duct (1).
- Remove the air distribution duct (1) from the I/P trim panel (2).
Installation Procedure
- Install the air distribution duct (1) to the I/P trim panel (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (3) to the air distribution duct (1).
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the I/P trim panel. Refer to
Instrument Panel Assembly Replacement
in Instrument Panel, Gages, and Console.