For 1990-2009 cars only
Circuit Description
A replacement EBCM is supplied with generic software and must be programmed to match the specific vehicle application.
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
The EBCM is not programmed with complete software.
Action Taken When the DTC Sets
| • | The EBCM disables the ABS/DRP/TCS/VSES. |
| • | The ABS indicator turns ON. |
| • | The brake warning indicator turns ON. |
| • | The message center displays the service stability system message. |
| • | The traction off indicator turns on. |
Conditions for clearing the DTC
The DTC clears when software programming is complete.
Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the ABS Diagnostic System Check? | Go to Step 2 | |
2 | Perform the set-up procedure for the EBCM. Refer to Service Programming System (SPS) in Programming. Did you complete the action? | -- |
