Rear Wheel Opening Rear Flare Replacement. Chevrolet Avalanche

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Avalanche - 4WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear Wheel Opening Rear Flare Replacement

Callout	Component Name
Preliminary Procedure Remove the rear wheelhouse inner panel extensions. Refer to Rear Wheelhouse Panel Liner Replacement .
1	Rear Wheel Opening Rear Flare Nut (Qty: 3)
2	Rear Wheel Opening Rear Flare Procedure Clean the area where the flare will be mounted. Use a suitable solvent with a 50/50 mixture of isopropyl alcohol and water by volume, or high-flash naphtha. Warm the rear bumper using the J 25070 Heat Gun. DO NOT touch the adhesive surface when the tape liner is removed. Peel the tape liner off and install the rear wheel opening rear flare. Drill holes on fascia if required.

Callout

Component Name

Remove the rear wheelhouse inner panel extensions. Refer to Rear Wheelhouse Panel Liner Replacement .

Rear Wheel Opening Rear Flare Nut (Qty: 3)

Rear Wheel Opening Rear Flare

Clean the area where the flare will be mounted. Use a suitable solvent with a 50/50 mixture of isopropyl alcohol and water by volume, or high-flash naphtha.
Warm the rear bumper using the J 25070 Heat Gun.
DO NOT touch the adhesive surface when the tape liner is removed. Peel the tape liner off and install the rear wheel opening rear flare.
Drill holes on fascia if required.