Preliminary Procedure

1. Remove the right side rear seat No. 2. Refer to Rear Number 2 Seat Replacement .
2. Remove rear seat No. 2 back cushion cover and pad. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .
3. Remove rear seat No. 2 back cushion cover and pad. Refer to Rear Seat Number 2 Cushion Cover and Pad Replacement .

1

Rear Seat Shoulder Belt Opening Bezel Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Position the seat belt webbing aside to access the screws.

Tighten
2 N·m (18 in)

2

Rear Seat Shoulder Belt Opening Bezel

Tip
The bezel will remain on the seat belt assembly.

3

Rear Seat Hinge Finish Cover Screw (Qty: 2)

4

Rear Seat Hinge Finish Cover

Procedure

Slide the cover upward and off the seat belt assembly.

5

Rear Seat No. 2 Belt Bracket Bolt

Tighten
52 N·m (38 lb ft)

6

Rear Seat No. 2 Belt Bracket

7

Rear Seat No. 2 Belt Bolt

Tighten
52 N·m (38 lb ft)

8

Rear Seat No. 2 Belt Bolt

Tighten
52 N·m (38 lb ft)

9

Rear Seat No. 2 Belt Assembly