Engine Coolant Fan Upper Shroud Replacement Mechanical
Removal Procedure
- Loosen the air cleaner outlet duct clamps from the throttle body.
- Loosen the air cleaner outlet duct clamps from the mass airflow sensor (2).
- Remove the air cleaner outlet duct.
- If equipped remove the throttle body heater hose retainer from the fan shroud.
- If equipped remove the inlet radiator hose retainer from the fan shroud.
- Remove the fan shroud retainers.
- Remove the fan shroud bolts
- Remove the upper fan shroud.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the upper fan shroud.
- Install the fan shroud bolts.
Tighten
Tighten the bolts to 9 N·m (80 lb in).
- Install the fan shroud retainers.
- If equipped install the inlet radiator hose retainer to the fan shroud
- If equipped install the throttle body heater hose retainer to the fan shroud.
- Install the air cleaner outlet duct.
- Tighten the air cleaner outlet duct clamp at the throttle body.
Tighten
Tighten the clamp to 4 N·m (35 lb in).
- Tighten the air cleaner outlet duct clamp at the mass airflow sensor (2).
Tighten
Tighten the clamp to 4 N·m (35 lb in).