Removal Procedure
- Remove the generator. Refer to
Generator Replacement.
- Remove the power steering pump. Refer to
Power Steering Pump Replacement.
- Remove the engine wiring harness clip bolt (3) are reposition the clip (1) away from the generator bracket.
- Remove the generator bracket bolts.
- Remove the generator bracket.
Installation Procedure
- Position the generator bracket to the engine.
Caution: Refer to Fastener Caution in the Preface section.
- Install the generator bracket bolts.
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
- Position the engine wiring harness clip (1) to the generator bracket and install the engine harness clip bolt (3).
Tighten
Tighten the bolt to 9 N·m (80 lb in).
- Install the power steering pump. Refer to
Power Steering Pump Replacement.
- Install the generator. Refer to
Generator Replacement.