Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.

1

Axle Shaft Bolt (Qty: 8)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
156 N·m (115 lb ft)

2

Rear Axle Shaft

3

Rear Axle Shaft Gasket

Tip
When installing the NEW gasket, apply a small amount of clean grease to hold the gasket in place while aligning the mounting hole in the axle shaft and the hub.