For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the left front wheel assembly. Refer to Tire and Wheel Removal and Installation.
- Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side.
- Disconnect the washer pump hoses (1, 2) from the left side fender flange. Refer to Windshield Washer Hose Replacement.
- Drain the windshield washer solvent into a suitable container.
- Disconnect the electrical connectors.
- Lower the vehicle in order to access the hood latch.
- Open the hood.
- Remove the windshield washer solvent cap.
- Remove the auxiliary battery tray, if equipped. Refer to Battery Tray Replacement.
- Remove the upper windshield washer container bolt from under the auxiliary battery tray, if equipped.
- Remove the upper windshield washer solvent container bolts.
- Remove the windshield washer solvent container assembly (2).
Note: Remove the washer container from the underside of the vehicle through the wheelhouse opening.
Installation Procedure
- Transfer washer pumps and level indicator to the new washer solvent container.
- Install the windshield washer container assembly.
- Install the upper windshield washer container bolt to the auxiliary battery tray, if equipped.
- Install the upper windshield washer solvent container bolts and tighten to 9 N·m (80 lb in).
- Install the auxiliary battery tray, if equipped. Refer to Battery Tray Replacement.
- Install the windshield washer solvent cap.
- Connect the electrical connectors.
- Connect the washer pump hoses (1, 2). Refer to Windshield Washer Hose Replacement.
- Install the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side.
- Install the left front wheel assembly. Refer to Tire and Wheel Removal and Installation.
- Fill the washer solvent container with windshield solvent. Refer to Fluid and Lubricant Recommendations.
Caution: Refer to Fastener Caution in the Preface section.
