GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Avalanche - 4WD 🢒 Body Hardware and Trim 🢒 Floor Coverings and Headlinings 🢒 Rear Floor Panel Carpet Replacement

Rear Floor Panel Carpet Replacement Extended Wheelbase


Object Number: 1694599 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the rear seats. Refer to Rear Seat Replacement and Rear Number 2 Seat Replacement .
  3. Remove the rear seat belt buckles. Refer to Rear Seat Belt Buckle Replacement .
  4. Remove the back body opening molding. Refer to Rear Door Upper Garnish Molding Replacement .
  5. Remove the back rear corner upper molding. Refer to Body Rear Corner Garnish Molding Replacement - Right Side and Body Rear Corner Garnish Molding Replacement - Left Side .
  6. Remove the rear door sill plate. Refer to Rear Side Door Sill Plate Replacement .
  7. Remove the lock pillar molding. Refer to Body Lock Pillar Garnish Molding Replacement .
  8. Remove the body side trim panel. Refer to Rear Quarter Trim Panel Replacement - Left Side and Rear Quarter Trim Panel Replacement - Right Side .

1

Rear Floor Panel Carpet Assembly

2

Rear Floor Panel Carpet Escutcheon

Tip
Escutcheon to be installed prior to locating carpet to floor studs.

Rear Floor Panel Carpet Replacement Standard Wheelbase w/o AS3 and AW2


Object Number: 1671388 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the rear seats. Refer to Rear Seat Replacement and Rear Number 2 Seat Replacement .
  3. Remove the rear seat belt buckles. Refer to Rear Seat Belt Buckle Replacement .
  4. Remove the back body opening molding. Refer to Rear Door Upper Garnish Molding Replacement .
  5. Remove the back rear corner upper molding. Refer to Body Rear Corner Garnish Molding Replacement - Right Side and Body Rear Corner Garnish Molding Replacement - Left Side .
  6. Remove the rear door sill plate. Refer to Rear Side Door Sill Plate Replacement .
  7. Remove the lock pillar molding. Refer to Body Lock Pillar Garnish Molding Replacement .
  8. Remove the body side trim panel. Refer to Rear Quarter Trim Panel Replacement - Left Side and Rear Quarter Trim Panel Replacement - Right Side .

1

Rear Floor Panel Carpet Assembly

2

Rear Floor Panel Carpet Escutcheon

Tip
Escutcheon to be installed prior to locating carpet to floor studs.

Rear Floor Panel Carpet Replacement Standard Wheelbase w/AS3 and AW2


Object Number: 1671343 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling.
  2. Remove the rear seats. Refer to Rear Seat Replacement and Rear Number 2 Seat Replacement.
  3. Remove the rear seat belt buckles. Refer to Rear Seat Belt Buckle Replacement.
  4. Remove the back body opening molding. Refer to Rear Door Upper Garnish Molding Replacement.
  5. Remove the back rear corner upper molding. Refer to Body Rear Corner Garnish Molding Replacement - Right Side and Body Rear Corner Garnish Molding Replacement - Left Side.
  6. Remove the rear door sill plate. Refer to Rear Side Door Sill Plate Replacement.
  7. Remove the lock pillar molding. Refer to Body Lock Pillar Garnish Molding Replacement.
  8. Remove the body side trim panel. Refer to Rear Quarter Trim Panel Replacement - Left Side and Rear Quarter Trim Panel Replacement - Right Side.

1

Cargo Tie Down Loop Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
35 N·m(25 lb ft)

2

Cargo Tie Down Loop Assembly

3

Rear Floor Panel Carpet Assembly