Seat Cushion Trim Cover and Pad Replacement. Chevrolet Avalanche

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Avalanche - 4WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Seat Cushion Trim Cover and Pad Replacement

Seat Cushion Trim Cover and Pad Replacement Tahoe with HP2

Callout	Component Name
Preliminary Procedures Remove the front seat. Refer to Front Seat Replacement - Bucket. Remove the front seat cushion outer trim panel. Refer to Front Seat Cushion Outer Trim Panel Replacement. Remove the front seat cushion inner trim panel. Refer to Front Seat Cushion Inner Trim Panel Replacement.
1	Front Seat Cushion Cover Procedure Disengage the j-channel retainers from the seat cushion frame. Remove the hog rings. Tilt the seat back forward to make it easier to remove and install the cover. Disconnect the electrical connectors that attach to the seat cushion, if equipped. Remove the seat cushion cover and pad from the seat cushion frame as an assembly. Pull the cover away from the pad to disengage the hog rings.
2	Front Seat Cushion Pad Procedure If working on the passenger seat, re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References.

Callout

Component Name

Preliminary Procedures

Remove the front seat. Refer to Front Seat Replacement - Bucket.
Remove the front seat cushion outer trim panel. Refer to Front Seat Cushion Outer Trim Panel Replacement.
Remove the front seat cushion inner trim panel. Refer to Front Seat Cushion Inner Trim Panel Replacement.

Front Seat Cushion Cover

Procedure

Disengage the j-channel retainers from the seat cushion frame.
Remove the hog rings.
Tilt the seat back forward to make it easier to remove and install the cover.
Disconnect the electrical connectors that attach to the seat cushion, if equipped.
Remove the seat cushion cover and pad from the seat cushion frame as an assembly.
Pull the cover away from the pad to disengage the hog rings.

Front Seat Cushion Pad

Procedure

If working on the passenger seat, re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References.

Seat Cushion Trim Cover and Pad Replacement without HP2

Callout	Component Name
Preliminary Procedures Remove the front seat. Refer to Front Seat Replacement - Bucket. Remove the front seat recliner lever, if equipped. Refer to Driver or Passenger Seat Recliner Handle Replacement. Remove the front seat lumbar actuator knob, if equipped. Refer to Driver Seat Lumbar Support Actuator Knob Replacement. Remove the front seat adjuster outer finish cover. Refer to Front Seat Cushion Outer Trim Panel Replacement.
1	Front Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement.
2	Front Seat Riser Finish Cover Tip Pull rearward to disengage the cover from the seat riser.
3	Front Seat Cushion Cover and Pad Procedure Disengage the j-channel retainers from the seat cushion frame. Remove the seat cushion cover and pad from the seat cushion frame as an assembly.
4	Front Seat Cushion Pad Procedure If working on the passenger seat, re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References.