Application | Specification | |
---|---|---|
Metric | English | |
A/C High Pressure Recirculation Switch | 6 N·m | 53 lb in |
A/C Low Pressure Switch | 6 N·m | 53 lb in |
A/C Refrigerant Filter Retaining Nuts | 15 N·m | 11 lb ft |
Accumulator Bracket Nut | 9 N·m | 80 lb in |
Accumulator Clamp Bolt | 10 N·m | 8 lb ft |
Air Distribution Duct Screws | 1.6 N·m | 14 lb in |
Air Outlet Mounting Screw | 1.6 N·m | 14 lb in |
Auxiliary A/C Tubes at the Auxiliary HVAC Module | 16 N·m | 12 lb ft |
Auxiliary Evaporator Tube to TXV Nut | 28 N·m | 21 lb ft |
Auxiliary HVAC Module A/C Line Nut | 16 N·m | 12 lb ft |
Auxiliary HVAC Module Mounting Nuts to Vehicle | 9 N·m | 80 lb in |
Blower Motor Insulating Cover Screw | 1.6 N·m | 14 lb in |
Blower Motor Relay/Resistor Screw | 1.6 N·m | 14 lb in |
Compressor Bracket Mounting Bolts | 50 N·m | 37 lb ft |
Compressor Clutch Coil Connector Retaining Bracket Screw | 9 N·m | 80 lb in |
Compressor Clutch Plate Retaining Bolt | 18 N·m | 13 lb ft |
Compressor Discharge Hose Nut at Compressor | 16 N·m | 12 lb ft |
Compressor Hose Bolt to Compressor (L18 Harrison) | 34 N·m | 25 lb ft |
Compressor Mounting Bolts (L18 Harrison) | 50 N·m | 37 lb ft |
Compressor Mounting Bolts (LR4, LM7, LQ4 Denso) | 50 N·m | 37 lb ft |
Compressor Suction/Discharge Hose Bolt | 34 N·m | 25 lb ft |
Compressor Suction Hose Nut to Accumulator | 16 N·m | 12 lb ft |
Compressor Suction Hose to Accumulator | 41 N·m | 30 lb ft |
Condenser Upper Insulator Retainer Bolts | 2.4 N·m | 21 lb in |
Discharge Hose Mounting Bolt (LR4, LM7, LQ4 Denso) | 16 N·m | 12 lb ft |
Evaporator Tube Fitting at Orifice | 25 N·m | 18 lb ft |
Evaporator Tube Nut at Condenser | 16 N·m | 12 lb ft |
Evaporator Tube Nut at Evaporator | 16 N·m | 12 lb ft |
Evaporator Tube to the Auxiliary A/C Tube | 16 N·m | 12 lb ft |
Filter Access Door Screw | 1.6 N·m | 14 lb in |
Floor Air Outlet Duct Screw | 1.6 N·m | 14 lb in |
Heater A/C Auxiliary Tubes Retaining Nuts | 7 N·m | 62 lb in |
Heater Core Cover Screws | 1.6 N·m | 14 lb in |
Heater Hose Outlet Mounting Nut and Bolt | 25 N·m | 18 lb ft |
Heater/Ventilation Module Mounting Nuts | 9 N·m | 80 lb in |
Heater/Ventilation Module Mounting Screws | 4 N·m | 35 lb in |
Heater Ventilation Module Screws | 1.6 N·m | 14 lb in |
Insulator Retainers and Bolts | 2.4 N·m | 21 lb in |
Pressure Relief Valve | 9 N·m | 80 lb in |
Suction Hose Mounting Bolt (LR4, LM7, LQ4 Denso) | 16 N·m | 12 lb ft |