GM Service Manual Online
For 1990-2009 cars only

Air Conditioning Cycling Switch Replacement HP2


Object Number: 1965586  Size: MF

Callout

Component Name

Preliminary Procedures

Disconnect the electrical connector from the pressure sensor.

1

A/C Refrigerant Pressure Sensor

Caution: Refer to Fastener Caution in the Preface section.

Tip
Remove and discard the O-ring. Refer to O-Ring Replacement.

Tighten
6 N·m (53 lb in)

Air Conditioning Cycling Switch Replacement Non-HP2

Removal Procedure

  1. Disconnect the electrical connector from the A/C low pressure switch.

  2. Object Number: 660417  Size: SH
  3. Remove the A/C low pressure switch from the accumulator.
  4. Remove the O-ring and discard.

Installation Procedure

  1. Install the new O-ring seal to the switch. Refer to O-Ring Replacement.
  2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 660417  Size: SH
  3. Install the A/C low pressure switch to the accumulator and tighten to 6 N·m (53 lb in).
  4. Connect the electrical connector to the A/C low pressure switch.
  5. Leak test the fittings of the components using the J 39400-A .