Rear Axle Shaft and/or Gasket Replacement. Chevrolet Avalanche

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Avalanche - 4WD 🢒 General Information 🢒 General Information 🢒 Rear Axle Shaft and/or Gasket Replacement

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
1	Axle Shaft Bolt (Qty: 8) Caution: Refer to Fastener Caution in the Preface section. Tighten 156 N·m (115 lb ft)
2	Rear Axle Shaft
3	Rear Axle Shaft Gasket Tip When installing the NEW gasket, apply a small amount of clean grease to hold the gasket in place while aligning the mounting hole in the axle shaft and the hub.