GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Aveo 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Notice: Refer to Vehicle Lifting and Jacking Notice in the Preface section.


    Object Number: 1241958 Size: SH
  1. Lift and suitably support the vehicle, allowing the front suspension to hang free.
  2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.

    4. Object Number: 1241959 Size: SH
  4. Disconnect the stabilizer shaft from the knuckle by removing the stabilizer shaft link assembly.

Installation Procedure

    Object Number: 1241958 Size: SH
  1. Install the stabilizer shaft into the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.

    3. Tighten
    Tighten the stabilizer shaft link nuts to 50 N·m (37 lb ft).

  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.