Tools Required
J 28467-B
(DW-117) Universal Engine Support Fixture
Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the upper radiator cover.
- Remove the right front splash shield.
- Support the engine assembly using the
J 28467-B
(1).
- Remove the engine mount bracket retaining bolts.
- Remove the engine mount retaining nuts.
- Lower the engine.
- Remove the engine mount.
Installation Procedure
- Install the engine mount.
- Raise the engine.
Notice: Refer to Fastener Notice in the Preface section.
- Install the engine mount retaining nuts.
Tighten
Tighten the engine mount retaining nuts to 40 N·m (30 lb ft).
- Install the engine mount bracket retaining bolts.
Tighten
Tighten the engine mount bracket retaining bolts to 55 N·m (41 lb ft).
- Remove
J 28467-B
(1).
- Install the right front splash shield.
- Install the upper radiator cover.
- Connect the negative battery cable.