EN-48803 Camshaft Seal Installer
Important: Use extreme care when removing the camshaft not to nick, scratch, or damage the camshaft lobes or bearing surfaces.
Important: Use extreme care when installing the camshaft not to nick, scratch, or damage the camshaft lobes or bearing surfaces.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the camshaft cap bolts to 16 N·m (12 lb ft).
Tighten
Tighten the intake camshaft gear bolt to 67.5 N·m (49 lb ft).
Tighten
Tighten the exhaust camshaft bolt to 67.5 N·m (49 lb ft).
Tighten
Tighten the valve cover nuts to 9 N·m (80 lb in).
Tighten
Tighten the spark plug cover bolts to 3 N·m (27 lb in).