GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1252095  Size: SH
  1. Open the hatchback door.
  2. Remove the hatchback door lower garnish molding. Refer to Hatchback Door Lower Garnish Molding Replacement in Interior Trim.
  3. Remove the screws and the hatchback lock.
  4. Disconnect the lock rods and the electrical connector.

Installation Procedure


    Object Number: 1252095  Size: SH
  1. Connect the lock rods and the electrical connector.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the hatchback lock with the screws.
  4. Tighten
    Tighten the hatchback door lock screws to 6 N·m (53 lb in).

  5. Install the hatchback door lower garnish molding. Refer to Hatchback Door Lower Garnish Molding Replacement in Interior Trim.
  6. Close the hatchback door.