GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1248287  Size: SH
  1. Remove the door seal trim. Refer to Door Water Deflector Replacement .
  2. Remove the screw securing the door handle to the door.
  3. Disconnect the inside door handle and the lock rods.

Installation Procedure


    Object Number: 1248287  Size: SH
  1. Connect the inside door handle and the lock rods.
  2. Insert the inside door handle into the slots in the door.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the inside door handle screw.
  5. Tighten
    Tighten the inside door handle screw to 3 N·m (27 lb in).

  6. Install the door seal trim. Refer to Door Water Deflector Replacement .