Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the floor console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.
- Disconnect the control module/receiver electrical connector.
- Slide the control module/receiver away from its mounting bracket.
Installation Procedure
- Install the control module/receiver on its mounting bracket.
- Connect the control module/receiver electrical connector.
- Install the floor console. Refer to
Front Floor Console Replacement
in Instrument Panel, Gages, and Console.
- Connect the negative battery cable.