GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Aveo 🢒 Transmission/Transaxle 🢒 Shift Lock Control 🢒 Shift Lock Control Solenoid Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1245816 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the floor console. Refer to Front Floor Console Replacement .
  3. Disconnect the wiring harness connectors from the shift control lever.

    4. Object Number: 1245812 Size: SH
  4. Loosen the control cable adjusting nut.
  5. Disconnect the control cable from the shift control lever assembly.

    6. Object Number: 1913504 Size: SH
  6. Remove the shift control lever assembly mounting bolts.
  7. Remove the shift control lever assembly.

    8. Object Number: 1913507 Size: SH
  8. Remove the two shift lever control knob retaining screws, the then knob from the assembly.
  9. Carefully remove the shift select cover from the lever assembly.

    10. Object Number: 1872313 Size: SH
  10. Remove the shift lock solenoid retaining screws.
  11. Remove the solenoid from the assembly.

Installation Procedure
  1. Install the shift lock solenoid on the assembly.

    2. Object Number: 1872313 Size: SH
  2. Install the shift lock solenoid retaining screws.
  3. Carefully install the shift select cover to the lever assembly.
  4. Install the shift lever control knob, then the retaining screws.

    5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1913504 Size: SH
  5. Install the shift control lever assembly and mounting bolts.

    6. Tighten
    Tighten the shift control lever assembly mounting bolts to 8 N·m (71 lb in).


    Object Number: 1245812 Size: SH
  6. Connect the control cable to the shift control lever assembly.
  7. Tighten the control cable adjusting nut.

    8. Tighten
    Tighten the control cable adjusting nut to 8 N·m (71 lb in).


    Object Number: 1245816 Size: SH
  8. Connect the harness connector.
  9. Adjust the control cable. Refer to Range Selector Lever Cable Adjustment .
  10. Install the floor console. Refer to Front Floor Console Replacement .
  11. Connect the negative battery cable.