GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Aveo 🢒 Transmission/Transaxle 🢒 Clutch 🢒 Clutch Release Cylinder Assembly

Removal Procedure

    Object Number: 1251814 Size: SH
  1. Remove the bolt and disconnect the hose from the clutch release cylinder.

    2. Object Number: 1251816 Size: SH
  2. Remove the clutch release cylinder bolts and remove the release cylinder from the transaxle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1251817 Size: SH
  1. Connect the release cylinder to the transaxle and install the bolts.

    2. Tighten
    Tighten the release cylinder bolts to 20 N·m (15 lb ft).


    Object Number: 1251814 Size: SH
  2. Connect the hose assembly to the cylinder body.
  3. Apply grease where the pushrod connects to the release lever. Be careful not to stain the boot.
  4. Bleed the air. Refer Hydraulic Clutch Release Point Adjustment .
  5. Adjust the clutch pedal. Refer Clutch Pedal Free Travel Adjustment .
  6. Fill the reservoir with clutch/brake fluid up to the MAX level.