GM Service Manual Online
For 1990-2009 cars only

    Object Number: 1251695  Size: SH
  1. Press the cluster shaft bearing onto the input shaft gear cluster.

  2. Object Number: 1251697  Size: SH
  3. Press the input driveshaft into the input shaft gear cluster assembly.

  4. Object Number: 1251692  Size: SH
  5. Install the snap ring at the base of the gear cluster.
  6. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1251691  Size: SH
  7. Install the detent screw at the end of the input driveshaft.
  8. Tighten
    Tighten the input driveshaft detent screw to 15 N·m (11 lb ft).