Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the engine control module (ECM) connectors.
- Remove the ECM retaining bolts.
- Remove the ECM from the ECM mount.
Installation Procedure
- Position the ECM in place.
Notice: Refer to Fastener Notice in the Preface section.
- Install the ECM to the ECM mount and install the retaining bolts.
Tighten
Tighten the ECM retaining bolts to 4 N·m
(35 lb in).
- Connect the negative battery cable.
- Perform a crankshaft position system variation learning procedure. Refer
to
Crankshaft Position System Variation Learn
.