• | J 42492-A (KM-421-A) Timing Belt Adjuster |
• | J 45059 Angle Meter |
• | KM-470-B Angular Torque Gage |
Caution: Refer to Battery Disconnect Caution in the Preface section.
Important: Remove the timing belt behind the power steering pump.
Important: Ensure that the exhaust camshaft gear dowel pin (1) is approximately in the 11 o'clock position.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the coolant pump retaining bolts to 10 N·m (89 lb in).
Tighten
Tighten the upper and lower front timing belt cover bolts to 10 N·m (89 lb in).
Tighten
Tighten the crankshaft pulley bolt to 95 N·m (70 lb ft) using a torque wrench. Using the
J 45059
or the
KM-470-B
, tighten the crankshaft pulley bolt 30 degrees plus 15 degrees.
Tighten
Tighten the air filter housing bolts to 8 N·m (71 lb in).