Removal Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Disconnect the negative battery cable.
- Remove the manual gearshift lever boot, if equipped with manual transmission.
- Remove the screws from the floor console.
- Disconnect the electrical connector.
- Engage the parking brake lever at full up position and release the park brake lever boot from the console
- Lift up on the floor console.
- Remove the floor console from the vehicle.
Installation Procedure
- Position the floor console to the vehicle and install park brake boot over park brake lever.
- Lower park brake lever.
- Connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the floor console screws.
Tighten
Tighten the floor console screws to 4 N·m (35 lb in).
- Install the gearshift lever boot, if equipped with manual transmission.
- Connect the negative battery cable.