Rear Door Trim Panel Replacement Hatchback
Tools Required
J 21104-B
(KM 475-B) Weatherstrip Remover Universal
Removal Procedure
- Lower the rear window.
- Remove the rear window regulator handle. Refer to
Door Window Regulator Handle Replacement
.
- Remove the door pull screw.
- Remove the inside door handle.
- Remove the rear door interior garnish molding.
- Remove the screws at the base of the trim panel.
- Pry off the trim panel using the trim remover
J 21104-B
(1).
Installation Procedure
- Install the trim panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws at the base of the trim panel.
Tighten
Tighten the trim panel screws to 3.5 N·m (31 lb in).
- Install the rear door interior garnish molding.
- Install the inside door handle.
- Install the door pull screw.
Tighten
Tighten the door pull screw to 3.5 N·m (31 lb in).
- Install the rear window regulator handle. Refer to
Door Window Regulator Handle Replacement
.
- Raise the window.