High Mount Stop Lamp Replacement Notchback

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Open the rear deck lid.
3. Remove the screws and the center high-mounted stop lamp (CHMSL).
4. Remove the CHMSL bulb.

1. Install the CHMSL bulb.
2. Install the CHMSL with the screws.
3. Connect the negative battery cable.

High Mount Stop Lamp Replacement Hatchback

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Open the hatchback door.
3. Pry open the center high-mounted stop lamp (CHMSL) access cover with a screwdriver.
4. Disconnect the electrical connector.
5. Remove the screws and the CHMSL.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the CHMSL with the screws.

Tighten
Tighten the CHMSL mounting screws to 3 N·m (27 lb in).

2. Connect the electrical connector.
3. Close the CHMSL access cover.
4. Connect the negative battery cable.