Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the air cleaner assembly.
- Disconnect the crankshaft position (CKP) sensor connector.
- Remove the CKP sensor retaining bolt.
- Remove the CKP sensor.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the CKP sensor with the retaining bolt.
Tighten
Tighten the CKP sensor retaining bolt to 6.5 N·m (58 lb in).
- Connect the CKP sensor connector.
- Install the air cleaner assembly.
- Connect the negative battery cable.