GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Aveo 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1343807 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the manifold absolute pressure (MAP) sensor connector.
  3. Remove the bolt with the MAP sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1343807 Size: SH
  1. Install the MAP sensor with the bolt.

    2. Tighten
    Tighten the MAP sensor bolt to 10 N·m (89 lb in).

  2. Connect the MAP sensor connector.
  3. Connect the negative battery cable.