Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the engine cover bolts and the nuts.
- Remove the engine cover.
- Disconnect the camshaft position (CMP) sensor electrical connector.
- Remove the timing belt front cover. Refer to
Timing Belt Replacement
.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the CMP sensor and bolt.
Tighten
Tighten the CMP sensor bolts to 7 N·m (62 lb in).
- Install the timing bolt front cover. Refer to
Timing Belt Replacement
.
- Connect the CMP sensor electrical connector.
- Install the engine cover.
- Connect the negative battery cable.