GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Aveo 🢒 Body Systems 🢒 Vehicle Access 🢒 Rear Compartment Lid Interior Release Latch Handle Replacement

Removal Procedure

    Object Number: 1252083 Size: SH
  1. Open the luggage compartment.
  2. Remove the luggage compartment rear trim panels. Refer to Rear Compartment Trim Panel Replacement .
  3. Remove the lock striker. Refer to Rear Compartment Lid Latch Striker Replacement .
  4. Disconnect the cable from the lock striker.

    5. Object Number: 1252078 Size: SH
  5. Remove the driver front and the rear seats. Refer to Front Seat Replacement - Bucket and Rear Seat Back Replacement .
  6. Reposition the floor carpet on the left side of the vehicle.
  7. Remove the bolt and the handle.

    8. Object Number: 1252079 Size: SH
  8. Disconnect the cable from the handle.
  9. Remove the cable.

Installation Procedure

    Object Number: 1252079 Size: SH
  1. Feed the cable from the luggage compartment to the passenger compartment.
  2. Connect the cable to the handle.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1252078 Size: SH
  3. Install the handle with the bolt.

    4. Tighten
    Tighten the remote cable handle bolt to 8 N·m (71 lb in).


    Object Number: 1252083 Size: SH
  4. Install the floor carpet to its original position.
  5. Install the front and the rear seats. Refer to Front Seat Replacement - Bucket and Rear Seat Back Replacement .
  6. Connect the cable to the lock striker.
  7. Install the lock striker. Refer to Rear Compartment Lid Latch Striker Replacement .
  8. Install the luggage compartment rear trim panels. Refer to Rear Compartment Trim Panel Replacement .