GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Aveo 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Door Trim Panel Replacement

Rear Door Trim Panel Replacement Hatchback

Tools Required

J 21104-B (KM 475-B) Weatherstrip Remover Universal

Removal Procedure

    Object Number: 1545027 Size: SH
  1. Lower the rear window.
  2. Remove the rear window regulator handle. Refer to Door Window Regulator Handle Replacement .
  3. Remove the door pull screw.
  4. Remove the inside door handle.

    5. Object Number: 1248474 Size: SH
  5. Remove the rear door interior garnish molding.
  6. Remove the screws at the base of the trim panel.
  7. Pry off the trim panel using the trim remover J 21104-B  (1).

Installation Procedure

    Object Number: 1248475 Size: SH
  1. Install the trim panel.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws at the base of the trim panel.

    3. Tighten
    Tighten the trim panel screws to 3.5 N·m (31 lb in).


    Object Number: 1545027 Size: SH
  3. Install the rear door interior garnish molding.
  4. Install the inside door handle.
  5. Install the door pull screw.

    6. Tighten
    Tighten the door pull screw to 3.5 N·m (31 lb in).

  6. Install the rear window regulator handle. Refer to Door Window Regulator Handle Replacement .
  7. Raise the window.

Rear Door Trim Panel Replacement Notchback

Removal Procedure

    Object Number: 1720604 Size: SH
  1. Lower the rear window.
  2. Remove the rear window regulator handle. Refer to Door Window Regulator Handle Replacement .
  3. Remove the door pull screw.
  4. Remove the inside door handle.

    5. Object Number: 1721762 Size: SH
  5. Remove the rear door interior garnish molding.
  6. Remove the screws at the base of the trim panel.
  7. Pry off the trim panel.

Installation Procedure

    Object Number: 1721762 Size: SH
  1. Install the trim panel.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws at the base of the trim panel.

    3. Tighten
    Tighten the trim panel screws to 3.5 N·m (31 lb in).


    Object Number: 1720604 Size: SH
  3. Install the rear door interior garnish molding.
  4. Install the inside door handle.
  5. Install the door pull screw.

    6. Tighten
    Tighten the door pull screw to 3.5 N·m (31 lb in).

  6. Install the rear window regulator handle. Refer to Door Window Regulator Handle Replacement .
  7. Raise the window.