Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the instrument panel assembly. Refer to
Instrument Panel Assembly Replacement
.
- Disconnect the electrical connector.
- Remove the actuating rod by snapping it out of the lever with needle-nose pliers.
- Remove the air temperature actuator retaining screws.
- Remove the air temperature actuator.
Installation Procedure
- Install the air temperature actuator.
- Install the retaining screws and tighten.
- Install the actuating rod.
- Connect the electrical connector.
- Install the instrument panel assembly. Refer to
Instrument Panel Assembly Replacement
.
- Connect the negative battery cable.