GM Service Manual Online
For 1990-2009 cars only

Rear Compartment Lid Lock Cylinder Replacement Hatchback

Removal Procedure


    Object Number: 1252086  Size: SH
  1. Remove the hatchback door lower garnish molding, if equipped.
  2. Disconnect the lock rod.
  3. Remove the nuts and the lock cylinder.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1252086  Size: SH
  1. Install the lock cylinder with the nuts.
  2. Tighten
    Tighten the luggage compartment lock cylinder nuts to 3 N·m (27 lb in).

  3. Connect the lock rod.
  4. Install the hatchback door lower garnish molding, if equipped.

Rear Compartment Lid Lock Cylinder Replacement Notchback

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1719901  Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the clips and the rear compartment lid trim.
  3. Disconnect the electrical connector.
  4. Disconnect the lock rod.
  5. Remove the bolt and the lock cylinder.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1719901  Size: SH
  1. Install the lock cylinder with the bolt.
  2. Tighten
    Tighten the luggage compartment lock cylinder bolt to 4 N·m (35 lb in).

  3. Connect the lock rod.
  4. Install the rear compartment lid trim with the clips.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .