Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Gently pry off the interior courtesy lamp lens by inserting a screwdriver into the recess along the edge of the lens.
- Remove the screws and the interior courtesy lamp housing from the headliner.
- Disconnect the electrical connector.
- Remove the bulb.
Installation Procedure
- Install a new bulb.
- Connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the interior courtesy lamp housing to the headliner with the screws.
Tighten
Tighten the interior courtesy lamp housing screws to 2.5 N·m (22 lb in).
- Press the courtesy lamp lens onto the housing.
- Connect the negative battery cable.