For 1990-2009 cars only
Adjustment Procedure
- Adjust the rear brakes. Refer to Drum Brake Adjustment .
- Release the parking brake.
- Raise and suitably support the vehicle.
- Check the parking brake cables for free movement.
- Lower the vehicle.
- Move the front seats backward to ensure there is enough working space.
- Pry off the plastic caps that cover the access holes to the parking brake console hood-to-tunnel bracket-screws.
- Unfasten the screws that secure the parking brake console hood to the tunnel brackets.
- Raise the console hood to expose the parking brake lever assembly and the adjustment nut.
- Partially raise and suitably support the vehicle.
- Turn the adjustment nut on the lever assembly until the wheels are difficult to turn.
- Loosen the nut until the rear wheels are just free to turn.
- Lower the vehicle.
- Position the parking brake console hood and fasten it to the tunnel brackets with the screws.
- Snap in the plastic caps that cover the access holes to the parking brake console hood-to-tunnel bracket screws.
- Adjust the front seats to their previous position.
Notice: Refer to Vehicle Lifting and Jacking Notice in the Preface section.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the parking brake console hood-to-tunnel bracket screws 2.5 N·m (22 lb in).
