GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Aveo 🢒 Engine 🢒 Engine Controls and Fuel - 1.2L 🢒 Crankshaft Position Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 2042549 Size: SH
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Disconnect the crankshaft position (CKP) sensor connector (1).
  3. Remove the CKP sensor retaining bolt.
  4. Remove the CKP sensor.

Installation Procedure

    Object Number: 2042549 Size: SH
  1. Install the CKP sensor.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the CKP sensor retaining bolt and tighten to 6.5 N·m (58 lb in).
  3. Connect the crankshaft position (CKP) sensor connector (1).
  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.