Removal Procedure
- Disconnect the battery negative cable. Refer to
Battery Negative Cable Disconnection and Connection.
- Disconnect the PCV hose.
- Remove the cylinder head cover bracket and bolts.
- Remove the spark plug cable cover (1).
- Disconnect the spark plug cable.
- Remove the cylinder head cover retaining bolts.
- Remove the cylinder head cover (1) with the gasket.
Installation Procedure
- Install the cylinder head cover (1) with the gasket.
Caution: Refer to Fastener Caution in the Preface section.
- Install the cylinder head cover retaining bolts.
Tighten
Tighten the cylinder head cover bolts to 10 N·m (7.4 lb ft).
- Connect the ignition cable.
- Install the ignition cable cover (1).
- Install the cylinder head cover bracket retaining bolts.
Tighten
• | Tighten the cylinder head cover bracket bolts to 10 N·m (7.4 lb ft). |
• | Tighten the spark plugs cable cover bolts to 10 N·m (7.4 lb ft). |
- Connect the PCV hose.
- Connect the battery negative cable. Refer to
Battery Negative Cable Disconnection and Connection.