Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Locate the vessel for containing engine oil beneath drain plug of the vehicle.
- Remove the oil drain (2) carefully.
- Drain the engine oil.
- Remove the oil filter cap (1).
- Remove the oil filter.
Installation Procedure
Note: Do not re-use the engine oil filter.
- Install the new oil filter.
Caution: Refer to Fastener Caution in the Preface section.
- Install the oil filter cap (1) and tighten to
25 N·m (18.4 lb ft).
Note: Refer to engine oil specifications in the owners manual and refill with the recommended engine oil and quantity.
- Install the drain plug (2) and tighten to
9 N·m (79.7 lb in).
- Open the oil filling cap.
- Refill the new engine oil.