GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Aveo 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Camshaft Position Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1241533 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the sensor electrical connector.
  3. Remove the camshaft position (CMP) sensor bolts and sensor.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1241533 Size: SH
  1. Install the CMP sensor and bolts.

    2. Tighten
    Tighten the camshaft position bolts to 12 N·m (106 lb in).

  2. Connect the sensor electrical connector.
  3. Connect the negative battery cable.