GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Aveo 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Accelerator Pedal Position Sensor Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1670940 Size: SH
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Disconnect the accelerator pedal position sensor connector.
  3. Remove the 3 accelerator pedal retaining nuts (1).
  4. Remove the accelerator pedal (2).

Installation Procedure

    Object Number: 1670940 Size: SH
  1. Install the accelerator pedal (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the 3 accelerator pedal retaining nuts (1).

    3. Tighten
    Tighten the accelerator pedal retaining nuts to 19 N·m (14 lb ft).

  3. Connect the accelerator pedal position sensor connector.
  4. Connect the battery cable. Refer to Battery Negative Cable Disconnection and Connection.