GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Aveo 🢒 Suspension 🢒 Tires and Wheels 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Caution: Refer to Vehicle Lifting and Jacking Caution in the Preface section.


    Object Number: 1241958 Size: SH
  1. Lift and suitably support the vehicle, allowing the front suspension to hang free.
  2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation.
  3. Remove the stabilizer shaft-to-knuckle nut and the shaft-to-link nut.

    4. Object Number: 1241959 Size: SH
  4. Disconnect the stabilizer shaft from the knuckle by removing the stabilizer shaft link assembly.

Installation Procedure

    Object Number: 1241958 Size: SH
  1. Install the stabilizer shaft into the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the stabilizer shaft-to-knuckle nut and the shaft-to-link nut and tighten to 50 N·m (37 lb ft).
  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation.
  4. Lower the vehicle.