Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Remove the front left wheel. Refer to
Tire and Wheel Removal and Installation.
- Remove the bolts and the front wheel well splash shield.
- Disconnect the washer hoses from the reservoir.
- Disconnect the reservoir pump electrical connectors.
- Remove the bolts, the nuts and the reservoir.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the reservoir with the nuts and the bolts.
Tighten
Tighten the washer fluid reservoir nuts and bolts to 9 N·m (80 lb in).
- Connect the reservoir pump electrical connectors.
- Connect the washer hoses to the reservoir.
- Install the front wheel well splash shield with the bolts.
Tighten
Tighten the front wheel well splash shield bolts to 1.5 N·m (13 lb in).
- Install the front left wheel. Refer to
Tire and Wheel Removal and Installation.
- Connect the negative battery cable.