GM Service Manual Online
For 1990-2009 cars only

Washer Pump Replacement Typical

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1248439  Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the left front left wheel. Refer to Tire and Wheel Removal and Installation.
  3. Remove the screws and the front wheel well splash shield.
  4. Disconnect the electrical connector.
  5. Disconnect the washer hose.
  6. Remove the washer pump.

Installation Procedure


    Object Number: 1248439  Size: SH
  1. Install the washer pump.
  2. Connect the washer hose.
  3. Connect the electrical connector.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the front wheel well splash shield with the screws.
  6. Tighten
    Tighten the front wheel well splash shield screws to 1.5 N·m (13 lb in).

  7. Install the front left wheel. Refer to Tire and Wheel Removal and Installation.
  8. Connect the negative battery cable.