For 1990-2009 cars only
- Install the speedometer-driven gear into the transaxle housing.
- Install the speedometer-driven gear bolt and tighten to 4 N·m (35 lb in).
- Install the clutch-release bearing guide and the clutch-release bearing. Refer to Release Bearing Replacement.
- Install the backup lamp switch into the transaxle housing and tighten to 20 N·m (15 lb ft).
- Install the differential into the transaxle housing. Refer to Differential Case Assemble.
- Install the bearing plate, with the shafts attached.
- Install the bearing plate bolts and tighten to 22 N·m (16 lb ft).
- Install the transaxle cover.
- Install the transaxle cover bolts and tighten to 18 N·m (13 lb ft).
- Install the gearshift lever cover.
- Install the gearshift lever cover bolts and tighten to 22 N·m (16 lb ft).
- Install the transaxle into the vehicle. Refer to Transmission Replacement.
Caution: Refer to Fastener Caution in the Preface section.
