General

• Type - Forward Gear

Synchronized Mesh Type

• Type - Reverse Gear

Sliding Mesh Type

• Gear Ratio - 1st

3.417

• Gear Ratio - 2nd

1.950

• Gear Ratio - 3rd

1.280

• Gear Ratio - 4th

0.971

• Gear Ratio - 5th

0.758

• Gear Ratio - Reverse

3.273

• Final Drive Ratio

4.105

• Fluid Capacity

2.1 L

2.21 qt

• Fluid Classification

75W-85

GL-4

Service

• Clearance Between Gear and Synchronizer Ring - Limit

0.5 mm

0.020 in

• Clearance Between Gear and Synchronizer Ring - Standard

1.0 mm

0.039 in

• Clearance Between Sleeve and Shift Fork - Limit

1.0 mm

0.039 in

• Clearance Between Sleeve and Shift Fork - Standard

0.2-0.6 mm

0.008-0.024 in

• Key Groove Width of Synchronizer Ring - Limit - 1st Gear

10.0 mm

0.394 in

• Key Groove Width of Synchronizer Ring - Standard - 1st Gear

9.6 mm

0.378 in

• Key Groove Width of Synchronizer Ring - Limit - 2nd, 3rd, 4th Gear

10 mm

0.394 in

• Key Groove Width of Synchronizer Ring - Standard - 2nd, 3rd, 4th Gear

9.6 mm

0.378 in

• Key Groove Width of Synchronizer Ring - Limit - 5th Gear

9.8 mm

0.386 in

• Key Groove Width of Synchronizer Ring - Standard - 5th Gear

9.4 mm

0.370 in

• Shift Fork End Thickness for Low Speed Shift Fork - Limit - 1st-2nd Gear

8.1 mm

0.319 in

• Shift Fork End Thickness for Low Speed Shift Fork - Standard - 1st-2nd Gear

8.7 mm

0.343 in

• Shift Fork End Thickness for Low Speed Shift Fork - Limit - 3rd-4th Gear

7.2 mm

0.283 in

• Shift Fork End Thickness for High Speed Shift Fork - Standard - 3rd-4th Gear

7.8 mm

0.307 in

• Shift Fork End Thickness for Low Speed Shift Fork - Limit - 5th Gear

7.2 mm

0.283 in

• Shift Fork End Thickness for Shift Fork - Standard - 5th Gear

7.8 mm

0.307 in

• Speedometer Gear Ratio - Driven/Drive

17/18

0.944

• Thrust Free Play of Differential Side Gear

0.05-0.33 mm

0.002-0.013 in

Gradeability

0.4 (tan O)

Maximum Speed

153 km/h

95.1 mph

Minimum Turning Radius

4.8 m

15.7 ft

Final Drive Ratio

4.105:1

Gear Ratio

• 1st

3.417:1

• 2nd

1.950:1

• 3rd

1.280:1

• 4th

0.971:1

• 5th

0.758:1

• Reverse

3.273:1

Maker

DWMC

Oil Capacity

2.1 L

2.21 qt

Type or Model

Y4M

0.33-0.37 mm (0.0130-0.0146 in)

0.45 mm (0.0177 in)

0.38-0.42 mm (0.0147-0.0165 in)

0.50 mm (0.0197 in)

0.43-0.47 mm (0.0169-0.0185 in)

0.55 mm (0.0217 in)

0.48-0.52 mm (0.0189-0.0205 in)

0.60 mm (0.0236 in)

0.53-0.57 mm (0.0209-0.0224 in)

0.65 mm (0.0256 in)

0.58-0.62 mm (0.0228-0.0244 in)

0.70 mm (0.0276 in)

0.63-0.67 mm (0.0248-0.0264 in)

0.75 mm (0.0295 in)

0.68-0.72 mm (0.0268-0.0283 in)

0.80 mm (0.0315 in)

0.73-0.77 mm (0.0287- 0.0303 in)

0.85 mm (0.0335 in)

0.78-0.82 mm (0.0307-0.0323 in)

0.90 mm (0.0354 in)

0.83-0.87 mm (0.0327-0.0343 in)

0.90 mm (0.0354 in)

0.88-0.92 mm (0.0346-0.0362 in)

1.00 mm (0.0394 in)

0.93-0.97 mm (0.0366-0.0382 in)

1.05 mm (0.0413 in)

0.98-1.02 mm (0.0386-0.0402 in)

1.10 mm (0.0433 in)

1.03-1.07 mm (0.0406-0.0421 in)

1.15 mm (0.0453 in)

Thrust Adjusting Shim

0.90-0.95 mm

0.0354-0.0374 in

1.00-1.05 mm

0.0394-0.0413 in

1.10-1.15 mm

0.0433-0.0453 in

1.20 mm

0.0472 in

Thrust Free Play of Differential Side

0.05-0.33 mm

0.0020-0.0130 in