GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Aveo 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Primary Latch Release Cable Replacement

Removal Procedure

    Object Number: 1252065 Size: SH
  1. Pull out the hood release handle in order to access the screws.
  2. Remove the screws and the hood release handle from the instrument panel.

    3. Caution: Refer to Vehicle Lifting and Jacking Caution in the Preface section.


    Object Number: 1252066 Size: SH
  3. Raise and suitably support the vehicle.
  4. Remove the front wheel. Refer to Tire and Wheel Removal and Installation.
  5. Remove the screws and the splash shield.

    6. Object Number: 1719808 Size: SH
  6. Open the hood.
  7. Remove the screws and the hood secondary latch.

    8. Object Number: 1719812 Size: SH
  8. Remove the cable from the hood release handle.
  9. Remove the cable from inside the vehicle.

Installation Procedure

    Object Number: 1719812 Size: SH
  1. Install the cable from inside the vehicle.
  2. Install the cable to the hood release handle.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1719808 Size: SH
  3. Install the screws and the hood secondary latch and tighten to 8 N·m (71 lb in).

    4. Object Number: 1252066 Size: SH
  4. Install the splash shield with the screws and tighten to 1.5 N·m (13 lb in).

    5. Object Number: 1252065 Size: SH
  5. Install the front wheel. Refer to Tire and Wheel Removal and Installation.
  6. Lower the vehicle.
  7. Install the hood release on the instrument panel with the screws and tighten to 1.5 N·m (13 lb in).