Rear Bumper Fascia Replacement Hatchback

1. Remove the screws and the mud guards.
2. Remove the screws and the splash shields.
3. Remove the tail lamps. Refer to Tail Lamp Replacement.



4. Remove the rear bumper fascia nuts (1).
5. Remove the rear bumper fascia bolt (3).
6. Remove the rear bumper fascia clip (2).



7. Remove the clips (1) from the rear sill trim (2).
8. Remove the rear sill trim panel (2).



9. Remove the rear side panel trim clips (1) and screw.



10. Remove the rear bumper fascia-to-lower back panel nut through the gap between the rear side panel trim and the lower back panel.



11. Remove the rear upper fascia screws (1).
12. Remove the fascia (2).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the fascia (1) with the rear upper fascia screws (2).

Tighten
Tighten the rear upper fascia screws to 1.5 N·m (13 lb in).




2. Install the rear bumper fascia-to-lower back panel nut (1) through the gap between the rear side panel trim and the lower back panel.

Tighten
Tighten the rear fascia nut to 4 N·m (35 lb in).




3. Install the rear side panel trim clips (1) and screw.

Tighten
Tighten the rear side panel trim screw to 1.5 N·m (13 lb in).




4. Install the rear sill trim panel (2).
5. Install the clips (1) to the rear sill trim (2).



6. Install the rear bumper fascia clip (2).
7. Install the rear bumper fascia bolt (3).

Tighten
Tighten the rear bumper fascia bolt (3) to 1.5 N·m (13 lb in).

8. Install the rear bumper fascia nuts (1).

Tighten
Tighten the rear bumper fascia nut (1) to 25 N·m (18 lb ft).

9. Install the tail lamps. Refer to Tail Lamp Replacement.
10. Install the screws and the splash shields.
11. Install the screws and the mud guards.

Rear Bumper Fascia Replacement Notchback

1. Remove the screws and the mud guards.
2. Remove the screws attaching the splash shields to the fascia.
3. Remove the screws from the bottom of the fascia.
4. Remove the rear luggage compartment side panels.



5. Remove the nuts in the luggage compartment.
6. Remove the bolts in the luggage compartment.



7. Remove the rear upper fascia screws.
8. Remove the tail lamps. Refer to Tail Lamp Replacement.
9. Remove the inner upper fascia retainers.
10. Remove the fascia.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the fascia with the rear upper fascia screws.

Tighten
Tighten the rear upper fascia screws to 1.5 N·m (13 lb in).

2. Install the rear inner upper fascia retainers.
3. Install the tail lamps. Refer to Tail Lamp Replacement.



4. Install the bolts in the luggage compartment.

Tighten
Tighten the luggage compartment fascia bolts to 4 N·m (35 lb in).

5. Install the nuts in the luggage compartment.

Tighten
Tighten the luggage compartment fascia nuts to 4 N·m (35 lb in).




6. Install the splash shield screws.

Tighten
Tighten the splash shield screws to 1.5 N·m (13 lb in).

7. Install the lower fascia screws.

Tighten
Tighten the lower fascia screws to 1.5 N·m(13 lb in).

8. Install the mud guards with the screws.

Tighten
Tighten the mud guard screws to 1.5 N·m (13 lb in).