GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
Aveo
🢒
Steering
🢒
Power Steering
🢒 Power Steering Return Hose Replacement
Removal Procedure
Siphon the power steering fluid from the reservoir.
Disconnect the suction hose from the power steering pump.
Disconnect the suction hose from the reservoir.
Remove the suction pipe retaining clamp nuts (1, 2) under the radiator.
Remove the suction hose from the vehicle.
Installation Procedure
Connect the suction hose to the reservoir.
Connect the suction hose to the power steering pump.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the suction pipe retaining clamp nuts (1, 2). Tighten the nuts to
8 N·m (70 lb in)
.
Fill the power steering fluid reservoir and bleed the power steering system. Refer to
Power Steering System Bleeding
.